🛡 Licensed & Insured  |  ⭐ Free Written Estimates
One Local Chimney Services — chimney and fireplace specialists, Dallas-Fort Worth

DALLAS-FORT WORTH DAMPER REPAIR

Get Your Damper Opening and Sealing Again

A damper stuck open lets your heated air straight up the flue; one stuck shut fills the room with smoke. I photograph the damper where it sits, show you what is wrong with it, and write the repair on an estimate.

  • ✓ I photograph the damper first
  • ✓ Repaired in place where possible
  • ✓ You see the problem yourself
  • ✓ Written estimate you keep
★★★★★ 5.0 on Google

Tell Me What Your Damper Is Doing

Name, mobile number and ZIP.

By submitting, you agree that One Local Chimney may call or text you about this request. Message and data rates may apply. Consent is not a condition of purchase. Reply STOP to opt out. Privacy Policy.

Google★★★★★5.0

Rated 5.0 by One Local Chimney customers · Read the reviews on Google

“Everything was done well and as promised. He was prompt, professional, and very efficient! His work was outstanding.”John T. · Google review
“Mike was super professional and honest. He came out, inspected everything carefully, and explained the issue in a way that made sense. The work was done clean and on time.”Khristina A. · Google review

The damper is the metal plate above the firebox that opens to let smoke out and closes to keep your heat in. When the handle snaps off, the blade rusts shut, or the frame warps, most people just stop using the fireplace — or worse, burn with it closed and fill the room with smoke. We free stuck dampers, replace broken handles and blades, and fit a top-sealing damper when the old one is past saving.

Signs your damper needs work

Our Process

01

Inspection

Open the damper by hand and check the blade, frame, hinges and handle.

02

Free It Up

Clear creosote and rust off the blade and seat so it can move again.

03

Handle or Blade

Replace a broken handle, worn hinge pins, or the blade itself.

04

Test

Open and close it in front of you, and show you how to work it.

Common Questions

My damper handle broke off. Do I need a whole new damper?

Usually not. On most fireplaces the handle, hinge pins and blade are separate parts and can be replaced on their own. A full damper replacement is only needed when the frame itself is cracked or warped — and if that is your situation we will show you the photo of it before quoting anything.

Gallery

Our Damper Work

The old damper arm, rusted and patched with a makeshift weld, before replacement, Dallas TX
Chimney damper blade with a new handle rod and mounting plate installed above the firebox, Dallas TX
Chimney damper pulled fully closed with the new handle, sealing the flue, Dallas TX

Common Questions

Damper Repair FAQ

My damper is stuck. Can it be repaired, or does it need replacing?

Often it can be freed. Rust, creosote buildup, and a bent plate are the usual reasons a throat damper stops moving, and those can be cleaned up and adjusted. What decides it is the frame, because that is set into the masonry — if the frame itself is cracked or rusted through, fixing the plate alone will not hold. You will see the photo before I recommend either one.

How can I tell if my damper still seals?

Close it on a cold, windy day and hold your hand near the opening. If you feel outside air moving, it is not sealing. Daylight around the edge when it is shut is the other giveaway. A throat damper is metal resting on metal, so even a good one was never airtight — the question is how far off yours is.

Can I just leave the damper open all the time?

You can, and plenty of people do, but you are leaving an open hole in the house. Conditioned air goes up the flue year round, and rain and animals have an easier way in. If yours will not close, it is worth fixing — or worth looking at a damper that seals at the top of the flue instead.

Damper Stuck or Handle Broken?

Contact us for a free inspection and estimate. Serving all of DFW.